We originally bought a set of four for our CNC Mill but they have never made it to the CNC side. We had a job come in that was a large bearing housing that needed to be sleeved. We couldn’t get it clamped and indicated in properly in the manual lathe. That’s when we moved to the Bridgeport manual mill. The housing rough casting and semi round on the outside with no real places to put toe clamps. We grabbed the set of Ignite clamps shimmed them off the table with some one two three blocks and used them like you would lathe chuck jaws. The way the clamps gripped and held the part while applying a positive downforce on the table was impressive to say the least. This set of clamps will be staying with our Bridgeport fixtures and we will be buying another set to use on the CNC. These clamps are far superior over the serrated style that adjust with the set screws. The downward force being applied with the bolt and wedge design of the Ignite clamps is the way to go. Next time we use them for something like this we will post a short video to show how they can be used.
First of all great product, I wish I could have found this product sooner. The amount of time I've saved will be worth it. I have them on all my mills. If your buying a piece of equipment this should be the first item then a vice. Highly recommend.
These milling machine T-Slot inserts are awesome!!! I wish I would have found these years ago. Super easy to install, and chips blow right off my table now!
These t-slot covers have made cleaning our mill a breeze. They are built to last and have held up perfectly for almost two years now. We highly recommend this product for it's convenience and the time it saves!
I am very pleased with the service and the product ! I used it on a European Mill with 12 mm T-slots . It's a little tight but with some oil it installed beautiful ! I actually have to get some more as it did not cover all what I wanted to ...